Sort by
Position
Name: A to Z
Name: Z to A
Price: Low to High
Price: High to Low
Created on
Display
36
48
72
per page
Mirco thermal conductivity detector-MTCD
Range: 0.1 – 199 & 1 – 1999 microgram / cubic meter
Measuring Range:2.5-99999RPM
Measuring distance:50~500mm
Resolution:0.1RPM
Accuracy:±0.02%+1digtal
Range:
Dew Point :-40 to +80 degrees C
Temperature: -20 to +80 degrees C
ABS housing
Temperature range:-30℃~℃400
D:S ratio 20:01
Measuring resolution:0.1
Temperature range:-10℃~℃400
Temperature range:-10℃~℃400
Sound Level Range 30~130dB
Accuracy ±1.5dB
Sound Level Range 30~130dB
Accuracy ±1.5dB
Air velocity:0.4~20m/s
Temperature:-10°C - 60°C
Humidity:20%-80%RH
Light:0-50000 Lux
Sound:30dB -130dB
Measuring range: 0-2000ppm
Resolution: 1ppm
Sensor Type: NDIR CO2 gas sensor
Combustible Gas Detector
Gas Type: Methane
Response time：2 seconds
Temperature Range:-20℃~℃400
Accuracy:±2°C or ±2%
Infrared Spectral Bandwidth:8~14um
Moisture content for:
Hardwood - 8 to 78.5 percent
Softwood - 10 to 93.7 percent
Plaster & concrete - 1 to 2.5 percent
Bricks - 0 to 22.9 percent
Detected gas:
Temperature range:-20C-300C
Measuring accuracy:±2C
Humidity:<90%RH
measuring the moisture:
Hardwood:8-78.5%
Softwood:10-93.7%
Plaster:1-2.5%
Bricks and concrete:0-22.9%
Range: 2.5-99999rpm
Basic accuracy: ± (0.1% n + 5d) rpm
Range: 50-99999RPM
accuracy:±0.03%+2
Range: 2-99999rpm
Accuracy: ± 0.05% + 1digit
Temperature - NTC:-20 to +100 °C
* pH : 0 to 14.00 pH, mV : -1999 to 1999 mV, Temp. : 0 to 100.0 oC.
* Manual/Auto Temp. compensation.
* Size : 160 x 80 x 35 mm.
Spectral Range:8–14 µm
Image Frequency: 9Hz
Minimum Focus Distance:0.1 m
Minimum Measurement Distance:26 cm
Pixel Pitch:12 µm
Contact test range:2 to 20,000 RPM
Non-contact test range: 2 to 99,999 RPM
Accuracy:± 0.05% + 1digit
Range: 0.5~19999rpm
Up to 64 channels of detection and 128 output channels
*Very useful tool to prevent heat stroke
Detection range 0.01 to 100 ppm
℃IR Temp. Range:-50 to 2200
Over 200,000 points of gas detection
Ammonia range:2.6-75.0 ppm
Flammable, toxic and Oxygen versions available
Resolution of infrared image: 32*32-1024 pixels
Resolution of infrared image: 160 x 120
* CMM (m3/min.), CFM (ft3/min.)
* m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF).
* 0.4 to 25.0 m/s., -P circuit.
Temperature Range:-9 to 50C
pH measurement range:3.5 to 9
Sunlight intensity range:
less than 500 Lux to more than 120,000 Lux.
Temperature Range:-20 to 60ºC
Accuracy:±0.5ºC
Humidity:0 to 100%RH
Accuracy:±3%RH
Temperature Range:-50 to 70ºC
Humidity:10 to 99%RH
Temperature range:-10℃ ~ ℃50
Resolution:℃0.1
Humidity RH range:10% ~ 99%
Resolution:1%
Relative Humidity Range:10 to 95%
Accuracy:±3% RH
Temperature Range:-28.0 to 60.0°C
Accuracy:±1.8°F/±1°C
℃Temperature Range 0～50
℃Temperature Accuracy ±1
Humidity Range 10%RH～90%RH
Humidity Accuracy ±5%
℃Temperature Range 0～50
℃Temperature Accuracy ±1
Humidity Range 10%RH～90%RH
Humidity Accuracy ±5%
Temperature Range:-30° to 100°C
Humidity Range:0 to 100% RH
Type K Temperature:-100~1372ºC
InfraRed Temperature:-50 to 500ºC
Humidity:0%~99.9%RH
℃Temperature range:-10℃~ 50
℃ Accuracy of temperature:±1
Humidity range ：5%RH ~ 98%RH
℃Temperature range:-10℃~ 50
℃ Accuracy of temperature:±1
Humidity range ：5%RH ~ 98%RH
℃Temperature range:-10℃~ 50
℃ Accuracy of temperature:±1
Humidity range ：5%RH ~ 98%RH
Indoor temperature:10°C~+50°C
outdoor temperature:-50°C~+90°C
Humidity Range:10% RH~99% RH
Measuring range Wood: 6 – 44%
Building material: 0.2– 2.0%
Measuring range:0.0 to 100.0%
Pin-less measurement depth from 20mm to 40mm
Measuring range Wood:6-99.9%
Accuracy: ±1%
Measuring range:0-100٪
Penetration Depth 20~40mm
Temperature Range:-10~60℃
Humidity Range:20%RH~90%RH
℃Temperature Range:-10~60
Humidity Range:20%RH~90%RH
Moisture measurement range:0.5~79.5%
Temperature measurement range:0-50℃
Wood density range:0.27-1.05g/cm3
wood moisture tester of DC resistance probe type
Measuring range Wood:0~80%RH
Accuracy:±0.5%
Resolution:0.1
Measuring range moisture: 5% -30%
Measuring range temperature -10C-60C
Maximum error Moisture:± 1% RH
Maximum error temperature ± 2.5C
wood moisture Measurement (%):2～40%
Probe insertion test (count):1000
Temperature range: -10°C~60°C
Humidity range: 0~100%RH
Range of wood:6 to 42%
accuracy: +4%
Resolution:0.1%
Temperature Range:-10~50 C
Accuracy:+1 C
Airflow calculations
Air velocity & temperature measurements
HOLD function
Auto average
Measuring range(Moisture):5%~ 40% (Wood moisture)
Ambient Temperature:-10~50 (14~122 F)
Measurement range: 0.01 g to 50 g
:low frequency range 10 Hz to 1,000 Hz
High frequency range:4,000 Hz to 20,000 Hz
Range:-20°C to 200°C
Measuring range(Moisture):2%~ 40% (Wood moisture)
Ambient Temperature:-10~50 (14~122 F)
Distance to spot: 12:1
Displays resistance to 1000 Ω
measuring AC and DC volts
Temperature range:Dependent on probe testo 660x
Temperature range:Dependent on probe testo 661x
