Search
Filters
Close

DPT-MOD differential pressure transmitter

Communication:RS-485 Modbus
Measure and monitor:
in-duct volume flow
velocity or differential pressure
Availability: Out of stock
Manufacturer: HK INSTRUMENTS
ریال

DPT-MOD is a multifunctional transmitter for measuring volume flow, velocity, and static and differential pressure. The measurements can be read and the configuration done via Modbus communication. DPT-MOD requires less wiring than the traditional 3-wire transmitters because multiple devices can be connected on serial line. DPT-MOD can also be used with several different measurement probes such as FloXact™ or pitot tube, and air dampers.

DPT-MOD series devices include:
Two selectable functions:
Measure and monitor in-duct volume flow, velocity or
differential pressure
Measure and monitor air flow across centrifugal fans
Multiple selectable measurement units:
Volume flow: m3/s, m3/h, cfm, l/s
Velocity: m/s, ft/min
Pressure: Pa, inWC, mmWC, kPa, mbar
Modbus communication protocol

DPT-MOD is a multifunctional transmitter for measuring volume flow, velocity, and static and differential pressure. The measurements can be read and the configuration done via Modbus communication. DPT-MOD requires less wiring than the traditional 3-wire transmitters because multiple devices can be connected on serial line. DPT-MOD can also be used with several different measurement probes such as FloXact™ or pitot tube, and air dampers.

DPT-MOD series devices include:
Two selectable functions:
Measure and monitor in-duct volume flow, velocity or
differential pressure
Measure and monitor air flow across centrifugal fans
Multiple selectable measurement units:
Volume flow: m3/s, m3/h, cfm, l/s
Velocity: m/s, ft/min
Pressure: Pa, inWC, mmWC, kPa, mbar
Modbus communication protocol

Products specifications
Producer HK INSTRUMENTS
Made in Finland
device type Transmitter
Powered by 24VAC/VDC
Power < 1.0 W
Working temperature 20°C-+50°C-
درجه حفاظت(Ip) IP54
Communication RS-485 Modbus