Sort by
Position
Name: A to Z
Name: Z to A
Price: Low to High
Price: High to Low
Created on
Display
36
48
72
per page
3alarm relays and audible alarms
Analog and Serial Outputs
gas detection:CO, NO2, O2, H2, H2S, CH4, C3H3
detects toxic and combustible gase
Field of Coverage: ± 90° solid angle from on axis
Detector:High Voltage Ionisation
Micro thermal conductivity detector-MTCD
Mirco thermal conductivity detector-MTCD
* pH : 0 to 14.00 pH, 1999 mV
Bandwidth: 70MHz
Range: 0.1 – 199 & 1 – 1999 microgram / cubic meter
AC Voltage range:0.1～1000V
AC Current range: 3000A
Power Energy: 9000kW
Measuring Range:2.5-99999RPM
Measuring distance:50~500mm
Resolution:0.1RPM
Accuracy:±0.02%+1digtal
measuring range from 0 to 10,000 lux
with IP 65
Range:
Dew Point :-40 to +80 degrees C
Temperature: -20 to +80 degrees C
ABS housing
Temperature range:-30℃~℃400
D:S ratio 20:01
Measuring resolution:0.1
Temperature range:-10℃~℃400
Temperature range:-10℃~℃400
temperature range:-40 to +70°C
16000 measurement points
Sound Level Range 30~130dB
Accuracy ±1.5dB
Sound Level Range 30~130dB
Accuracy ±1.5dB
Measuring range
MP 110 : -1000 to +1000 Pa
*Dual display Temp. & Conductivity with ATC
● Unit switching function
● Matrix liquid-crystal display screen
● LCD backlight
● Battery level indication
power supply:43 - 52 VDC
current consumption in normal state:
10mA @ 48 VDC
current consumption in alarm state:
30mA @ 48 VDC
Air velocity:0.4~20m/s
Temperature:-10°C - 60°C
Humidity:20%-80%RH
Light:0-50000 Lux
Sound:30dB -130dB
Pressure range:0...+100 Pa
QBE2002-P... different models:
QBE2003-P... different models:
QBE2004-P... different models:
QBE2103 different models:
QBE2104-P... different models:
Measuring range: 0-2000ppm
Resolution: 1ppm
Sensor Type: NDIR CO2 gas sensor
Combustible Gas Detector
Gas Type: Methane
Response time：2 seconds
*Dual display pH / mV & Temp.
100MHz bandwidth
1GSa/s real-time sampling rate
2 channels
:Range
Voltage: 10V~1000V AC/DC
AC Current : 10A/100A/1000A
Frequency :40~70Hz
Power:15%S
Power Factor:0~1.0
Temperature Range:-20℃~℃400
Accuracy:±2°C or ±2%
Infrared Spectral Bandwidth:8~14um
Moisture content for:
Hardwood - 8 to 78.5 percent
Softwood - 10 to 93.7 percent
Plaster & concrete - 1 to 2.5 percent
Bricks - 0 to 22.9 percent
MP-210 Types:
MP210P: -500 to 500 Pa - 2 to 28 m/s
MP210M: -2500 to 2500 Pa - 2 to 60 m/s
MP210G: -10,000 to 10,000 Pa - 4 to 100 m/s
MP210H: -500 to 500 mbar - 9 to 100 m/s
MP210HP: -2000 to 2000 mbar - 18 to 100 m/s
*Dual display conductivity and Temp.
Detected gas:
Hot wire Anemometer, Themprature
power measuremen,: max. value up to 10,000 watt
ACA :600 A max. range
DC voltage 200 V
AC voltage 600 V
OHMS 2 k ohm
power supply:24v
detects city gas leaking
detects firing gases
QBM4000 different models:
Bandwidth:50MHz
Bandwidth:50MHz
Bandwidth: 100MHz
* General purpose, high quality, cost effective.
* 1 to 13 pH (typical 0 to 14 pH).
* Epoxy body, w/BNC connector.
* Size : 10 mm Dia. x 128 mm.
Temperature range:-20C-300C
Measuring accuracy:±2C
Humidity:<90%RH
measuring the moisture:
Hardwood:8-78.5%
Softwood:10-93.7%
Plaster:1-2.5%
Bricks and concrete:0-22.9%
CO2,Carbon Dioxide gas sensors
(*Automatic temperature compensation (ATC
Range: 2.5-99999rpm
Basic accuracy: ± (0.1% n + 5d) rpm
Range: 50-99999RPM
accuracy:±0.03%+2
Range: 2-99999rpm
Accuracy: ± 0.05% + 1digit
QBM3700../MO different models:
Range of Measurement:
Bandwidth: 70MHz
Laser Thermometer Anemometer
AC 50V ~ 600V Voltage Detectors
Spectral Range:8–14 µm
Image Frequency: 9Hz
Minimum Focus Distance:0.1 m
Minimum Measurement Distance:26 cm
Pixel Pitch:12 µm
Contact test range:2 to 20,000 RPM
Non-contact test range: 2 to 99,999 RPM
Accuracy:± 0.05% + 1digit
Range: 0.5~19999rpm
AC 90V ~ 1000V Voltage Detectors
Frequency (Hz): 50/60Hz
AC Voltage:6V/60V/600V
* 0 to 14 pH x 0.01 pH.
* ATC (automatic temperature compensation).
* pH control setting, Temp. control setting.
* pH control relay output, Temp. control relay output.
