Leakage current clamp meter MCA-060
MCA-060 is a clamp on leakage current meter adopting updated CT technology and digital integration technology. The meter can reliably measure the small AC/DC currents and also inrush current (if long enough for the meter) with high accuracy.Real-time monitoring, MIN-AVG-MAX indicating, reading, saving and printing the data is possible using the software of the meter. MCA-060 is widely used in industrial facilities, automobile electrical flaw detecting, educational institutes, etc.
Easy to use
Innovative design
Peak hold
Out of range current indication
Transferring data to PC via RS232
Data hold
Auto Power-off (5 mins)
| Parameter |
Values |
| Measurement Range |
0mA~60.0A AC/DC |
| Test Mode |
Clip-on CT, noncontact measurement |
| Clamp Size |
16*18mm |
| Accuracy (typical) |
±2%rdg±5dgt (23±5℃, below 75%rh) |
| Resolution |
1mA AC/DC |
| Display |
Four digits LCD |
| Sampling Rate |
2 times/s |
| Range Shift |
Automatically |
| Frequency |
AC: 45Hz-400Hz |
| Polarity Indication |
DC current auto identified and display“—” |
| Line Voltage |
AC600V |
| Com-Configure |
Baud rate:9600, data bit:8, stop bit:1, check bit: NONE |
| Interface |
RS232 |
| Data Memory |
99units, “FULL” blinks when the memory is full |
| Working environment |
-10~50℃,below 80%RH |
| Limit Temperature Error |
-10~0℃ and 40~50℃, within 2%rdg |
| Insulating Strength |
AC 3700V/rms. (between the alloy of the clamp and the housing) |
| Applicable safety |
IEC1010-1, IEC1010-2-032, pollution:2, CAT Ⅲ(600V) |
| Weight |
220g (including the battery) |
| Dimension |
215mm×65mm×34mm |
| Power supply |
Zn-Mn dry battery,6F22,9V, continuous use for 100h |
