Name: A to Z
Name: Z to A
Price: Low to High
Price: High to Low
Up to 0.05% output accuracy
DC voltage, resistance
thermocouple and thermal resistance
Measure volts, mA, RTDs
thermocouples, frequency, and ohms
easy to operation and carry
Memory storage for up to 8 calibration results
HART mode inserts 250 ohm resistor in mA measure
Measure or source pressure
using any of 29 Fluke 700Pxx Pressure Modules
for calibrating, maintaining, and troubleshooting
Rechargeable Li-Ion battery
* Type k thermocouple calibrator.
* Type k thermocouple thermometer.
* -199 oC to 1230 oC, -325oF to 2246oF.
* Resolution : 0.1 oC ( <1000 oC ).
tester with multi-function
Measure / Source Voltage
(Compatible with pulsed RTD transmitters (pulses > 10ms
ºF or ºC selectable
Measure temperature from TC output
Simulate TC output
Selectable ºF or ºC
source 10 thermocouple types and 7 RTD types
The dual line measure/source display
Measure RTDs, thermocouples, ohms, and volts
* Professional, 1 KHz.
* Die casting aluminum alloy housing case.
* DC 9V batteries x 2 PCs.
* Size : round 50 mm Dia. x 82 mm.
Measure or generate 4 to 20 mA
Measure 0 to 30 V DC
generate pressures from vacuum to 2 MPa
pump can generate vacuum to -80 kPa
Measure pressure with internal sensor up to 345 bar sensor
Measure mA with 0.015% accuracy and 0.001 mA resolution
Measure pressure to 700 bar
using one of 29 Fluke 700Pxx Pressure Modules
30,100and 300 psi ranges
Pressure measurement to 0.05% of full span
Current measurement with 0.02% accuracy
and 0.001 mA resolution
Fluke 719 30G Range: -12 to 36 PSI
Fluke 719 100G Range: -12 to 120 PSI
Resolution: 0.01 PSI
Accuracy: up to 0.025%
30psi and 100 psi
mA signals to troubleshoot 4-20 mA loops
Power transmitters using 24 V loop supply
Measures 4 to 20 mA signals
Measure up to 30 V DC
check 24 V loop power supplier
mA sourcing, simulation and measurement
0.02% accuracy and 0.001 mA resolution
Current range:0to 24 mA
resolution: 0.001 mA
Measures V DC to 28 V
0.015%mA accuracy of
1µA resolution for mA source
Push button with 25% steps for fast
Measures Vdc to 28 V
Temperature Range:50 to 500°C
Target Size: 57m
Certify IR pyrometers from :–30°C to 500°C
target:Large 57 mm
* Current source : 0 to 24 mA, 2 ranges.
* Current measurement : 0 to 24 mA, 2 ranges.
* Power (12 V) and current measurement of two wire loop : 0 to 24 mA, 2 ranges.
* DC mV source : -199.9mV to +199.9mV.
94dB and 114dB Sound Calibration at 1kHz
Output Frequency:1000Hz, ±4%
±0.5℃ @ 100℃
±1.8℃ @ 500℃
One base station with one AC outlet supports up to six modules
Power supply 6V wall adaptor or four C-cell batteries