TES-92 ElectroSmog Meter

TES-92 ElectroSmog Meter
Item Number:
Frequency range: 50MHz to 3.5 GHz

Availability: Out of stock

Manufacturer: TES

Qty:

Old price: 31,500,000 ریال

Price: ریال

ELECTRICAL SPECIFICATIONS

Sensor type	Electric field (E)
Frequency range	50MHz to 3.5 GHz
Directional characteristic	Isotropic, 3-dimensional
Measurement range (CW signal>50MHz)	20mV/m to 108.0V/m
Absolute error(@1V/m and 50MHz)	± 1.0dB
Frequency response (taking into account typ. CAL factor)	± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz)
Isotropy deviation	Type. ±1.0dB 於 f>50 MHz
Overload limit	4.2W/m2 (40 V/m)
Temperature response(0 to 50 ℃)	± 1.5dB
Note	Unless otherwise stated, all specifications hold under the following assumptions: Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 ℃±3 ℃;relative air humidity 25% to 75%.

GENERAL SPECIFICATIONS

Measurement method	Digital , triaxial measurement
Directional characteristic	Isotropic, triaxial
Measurement range selection	One continuous range
Display resolution	0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm²
Setting time	Typically 1s ( 0 to 90% of meas. value)
Display refresh rate	Typically 400mS
Display type	LCD 4 digit
Audible alarm	Buzzer
Measurement units	mV/m , V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm²
Measurement display value	Instantaneous measured value, maximum value or average value since power-on.
Measurement alarm function	Adjustable threshold with ON/OFF
Measurement calibration factor CAL	Adjustable
Manual data memory and read storage	99 sets ( only recall by meter )
Battery	9V
Battery life	>15 hours
Accessory	9V battery, carrying case & manual

ELECTRICAL SPECIFICATIONS

Sensor type	Electric field (E)
Frequency range	50MHz to 3.5 GHz
Directional characteristic	Isotropic, 3-dimensional
Measurement range (CW signal>50MHz)	20mV/m to 108.0V/m
Absolute error(@1V/m and 50MHz)	± 1.0dB
Frequency response (taking into account typ. CAL factor)	± 1.0dB (50MHz to 1.9 GHz) , ±2.4dB(1.9GHz to 35GHz)
Isotropy deviation	Type. ±1.0dB 於 f>50 MHz
Overload limit	4.2W/m2 (40 V/m)
Temperature response(0 to 50 ℃)	± 1.5dB
Note	Unless otherwise stated, all specifications hold under the following assumptions: Sinusoidal signals; device in far-field of a source; probe head pointing toward source; ambient temperature +23 ℃±3 ℃;relative air humidity 25% to 75%.

GENERAL SPECIFICATIONS

Measurement method	Digital , triaxial measurement
Directional characteristic	Isotropic, triaxial
Measurement range selection	One continuous range
Display resolution	0.1mV/m, 0.1 μA/m, 0.1 μW/m², 0.001 μW/cm²
Setting time	Typically 1s ( 0 to 90% of meas. value)
Display refresh rate	Typically 400mS
Display type	LCD 4 digit
Audible alarm	Buzzer
Measurement units	mV/m , V/m , μA/m , mA/m , μW/m² , mW/m² , μW/cm²
Measurement display value	Instantaneous measured value, maximum value or average value since power-on.
Measurement alarm function	Adjustable threshold with ON/OFF
Measurement calibration factor CAL	Adjustable
Manual data memory and read storage	99 sets ( only recall by meter )
Battery	9V
Battery life	>15 hours
Accessory	9V battery, carrying case & manual

Products specifications

Product tags

SENSOTEC Store