Sort by
Position
Name: A to Z
Name: Z to A
Price: Low to High
Price: High to Low
Created on
Display
36
48
72
per page
Range: 0.5~19999rpm
AC 90V ~ 1000V Voltage Detectors
Frequency (Hz): 50/60Hz
AC Voltage:6V/60V/600V
* 0 to 14 pH x 0.01 pH.
* ATC (automatic temperature compensation).
* pH control setting, Temp. control setting.
* pH control relay output, Temp. control relay output.
Bandwidth : 100 MHz
Sample rate : 1GS/s
Max. Input voltage:300 V (peak)
Up to 64 channels of detection and 128 output channels
*Dual display Temp. & Conductivity or TDS with ATC
*Very useful tool to prevent heat stroke
*Programmable printing Bench Top pH / mV meter with Temp. & real time clock stamped
water resistant
continuity buzzer
Automatic rang
90-1000V AC
Noncontact Voltalert
with Adjust Sensitivity
4,000 counts
Detection range 0.01 to 100 ppm
℃IR Temp. Range:-50 to 2200
*Lowest cost pH pen
DC/AC voltage:600 V
ACA:600A,400A
DCA:600A,400A
Resistance:40 M ohm
Frequency :100KHz
Over 200,000 points of gas detection
Ammonia range:2.6-75.0 ppm
Flammable, toxic and Oxygen versions available
DC: 400mV/4V/40V/400V/600V
AC: 4V/40V/400V/750V
Current Range 400/1000A
Ohms Resistance Range:400Ω -40MΩ
Frequency Range:100Hz-800KHz
*Lowest cost pH pen
EC Range:3999 µS/cm
TDS Range:2000 ppm
Temp Range:0 to 60.0°C
Resolution of infrared image: 32*32-1024 pixels
Resolution of infrared image: 160 x 120
Measuring range:170-9060 HLD
Measuring range:0-100HD
Measuring range:0-100HA
Measuring range:200-900 HL
Accuracy:±4HLD
* CMM (m3/min.), CFM (ft3/min.)
* m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF).
* 0.4 to 25.0 m/s., -P circuit.
Voltage:100V-260V
Current:0-16A
Power 0-3680W
Power Factor 0-1
4poles
Voltage range:0.0-99.9V
Current range:0.00-9.99A
Power range: 00.00-99.99-999.9W
Energy range: 0-9999.9Wh
Capacity range:00.000-99.999Ah
Temperature range:-15°c ~60°c
DCA:200A,1000A
ACA:200A,1000A
Resistance: 2000 ohm
AC Voltage: 200 V/600V
DC Voltage: 200 mV /400 V/600 V
*Lowest cost pH pen
Measuring range 0 to +14 pH (Short-term to +80 °C max. 5 min)
Temperature Range:-9 to 50C
pH measurement range:3.5 to 9
Sunlight intensity range:
less than 500 Lux to more than 120,000 Lux.
Temperature Range:-20 to 60ºC
Accuracy:±0.5ºC
Humidity:0 to 100%RH
Accuracy:±3%RH
Temperature Range:-50 to 70ºC
Humidity:10 to 99%RH
AC Voltage:750V
DC Voltage:1000V
AC/DC Current:1500A
True Power:900kW
AC Voltage:15V/100V/300V/750V
AC Current:40A/100A/400A/1000A
True Power:0.60kW—750kW
Power Factor:0.3-1
Power supply:220V 50Hz Max 16A
Accuracy: 1.0
Constant: 6400imp/kWh
Power dissipation: <1W
Temperature range:-10℃ ~ ℃50
Resolution:℃0.1
Humidity RH range:10% ~ 99%
Resolution:1%
Relative Humidity Range:10 to 95%
Accuracy:±3% RH
Temperature Range:-28.0 to 60.0°C
Accuracy:±1.8°F/±1°C
℃Temperature Range 0～50
℃Temperature Accuracy ±1
Humidity Range 10%RH～90%RH
Humidity Accuracy ±5%
℃Temperature Range 0～50
℃Temperature Accuracy ±1
Humidity Range 10%RH～90%RH
Humidity Accuracy ±5%
Temperature Range:-30° to 100°C
Humidity Range:0 to 100% RH
Type K Temperature:-100~1372ºC
InfraRed Temperature:-50 to 500ºC
Humidity:0%~99.9%RH
℃Temperature range:-10℃~ 50
℃ Accuracy of temperature:±1
Humidity range ：5%RH ~ 98%RH
℃Temperature range:-10℃~ 50
℃ Accuracy of temperature:±1
Humidity range ：5%RH ~ 98%RH
℃Temperature range:-10℃~ 50
℃ Accuracy of temperature:±1
Humidity range ：5%RH ~ 98%RH
Indoor temperature:10°C~+50°C
outdoor temperature:-50°C~+90°C
Humidity Range:10% RH~99% RH
Measuring range Wood: 6 – 44%
Building material: 0.2– 2.0%
Measuring range:0.0 to 100.0%
Pin-less measurement depth from 20mm to 40mm
Measuring range Wood:6-99.9%
Accuracy: ±1%
Measuring range:0-100٪
Penetration Depth 20~40mm
Temperature Range:-10~60℃
Humidity Range:20%RH~90%RH
℃Temperature Range:-10~60
Humidity Range:20%RH~90%RH
Moisture measurement range:0.5~79.5%
Temperature measurement range:0-50℃
Wood density range:0.27-1.05g/cm3
wood moisture tester of DC resistance probe type
Measuring range Wood:0~80%RH
Accuracy:±0.5%
Resolution:0.1
Measuring range moisture: 5% -30%
Measuring range temperature -10C-60C
Maximum error Moisture:± 1% RH
Maximum error temperature ± 2.5C
Power supply:220V 50Hz Max 10A
Accuracy: 1.0
Constant: 6400imp/kWh
Power dissipation: <1W
Power supply:220V 50Hz Max 10A
Accuracy: 1.0
Constant: 6400imp/kWh
Power dissipation: <1W
Power supply:220V 50Hz Max 10A
Accuracy: 1.0
Constant: 6400imp/kWh
Power dissipation: <1W
DC/AC Voltage:200 mV/2/20/200/600 V
DC/AC Current:200uA/2m/20m/200m/10A
Resistance:200/2k/20k/200k/2M/20M ohm
hfe transistor:0-1000 hFE, NPN/PNP
input Impedance:10 M ohm
wood moisture Measurement (%):2～40%
Probe insertion test (count):1000
Bandwidth : 100 MHz
Sample rate : 1GS/s
Max. Input voltage:400 V (peak)
Range : 200/2,000 A, DC/AC
Output : 4 to 20 mA.
DC/AC Voltage:200 mV/2/20/200/600 V
DC/AC Current:200uA/2m/20m/200m/10A
Resistance:200/2k/20k/200k/2M/20M ohm
Capacitance:2000pF/20nF/200nF/2uF/20uF
temperature:-20℃ to 750℃
