MCG-500 is a hand-held combustible gas detector that detects the combustible gas leakage immediately. The audible alarm added to a flashing LED alarm helps the operator scan the environment properly. The visual and acoustical alarms help the operator to locate the gas leakage source precisely.
In clean environment the beep-rate of the device is within 4-8 times per second and the rate increases if the device approaches to the source, you can easily adjust the beep-rate.
The meter detects gases including: Natural gas, CO, Smoke Butane, Propane, Methane, Ethanol, Ammonia, Gasoline, industrial solvents, etc.
Adjusting sound alarm rate
LED alarm
Automatically reset
High sensitivity
Quick response time
Monophony earphone socket to avoid the noise
Reset button on the probe handle
| Parameter |
Values |
| Sensitivity |
50ppm Methane |
| Sensor Type |
Low Power Semiconductor |
| Response time |
2 seconds |
| Warm up time |
60 seconds approx( 25℃, 60% RH environment) |
| Operation Cycle |
Continual Operation |
| Sensor Size |
16 inches long goose neck |
| Continuous operation time |
8 hours (varying with operating status) |
| Low battery indication |
3±0.2V |
| Operating environment |
0~52℃ , 10~90% RH |
| Battery Life |
Continual Use For 8 Hours |
| Alarm Limit |
Lel 10% Of Methane |
| Power supply |
3*1.5V LR14 Battery |
| Weight |
312g（Including battery） |
| Dimension |
76*49*220mm |
