Digital Torque Meter (series) MTQ-300

MTQ-300 (series) is a digital display torque meter is designed and developed for detection and measuring of various torsions. Locking type drill chuck design, can easily clamp on a variety of workpieces, screwdriver heads, screwdriver sleeves, etc. The jaw of the sensor can be opened up to 12.7 mm. This torsion meter has accuracy as high as 0.5% and comparing to the traditional pointer torsion meters and torque wrenches, MTQ-300 series digital display torque meter has higher precision and credibility. The device is widely used in different industrial fields.

- High accuracy, High resolution and High sample rate
- Setting the upper and lower deviation value freely, sound alarm and automatically level signal output
- Test direction display (clockwise" + ", counterclockwise" - ")
- Liquid crystal display, green back-light panel
- Store 99 groups of test data, automatically calculating and storing the average of data, maximum and minimum
- Converting three units (N.M , Kgf.cm , Ibf.in) automatically
- Catching the peak value in test, showing it on display for 0-99 seconds, then releasing the value and being ready for the next peak
- Gravitational acceleration value can be set
- Auto Power off time can be set (0-99 minutes) 
- Using external intelligent charger, can charge the battery safety, extend battery life
- Serial output (baud rate, 9600), can print the test data 
- Average connection PC for real-time data can be read, stored, analyzed, printed and/or other operations