Sort by
Position
Name: A to Z
Name: Z to A
Price: Low to High
Price: High to Low
Created on
Display
36
48
72
per page
Field of view: 90° full 100% core of vision
Sensitivity: Very high, high, medium and low
Unique two-stage fire detection response
Range 110 ft /35 m (IR3),25 m/80 ft UV, UV/IR
Sensitivity 60 ft. to a 1 sq. ft. n-heptane fire
Sensitivity: Adjustable between 60 ft., 45 ft., 30 ft., and 15 ft
Air Temp range:-40C-85C
Temp accuracy:±0.6C
Measurement Range -30˚C ~ +70˚C
Accuracy ± 0.5˚C
Resolution: 0.01 Lux, 0.001 fc
Measure volts, mA, RTDs
thermocouples, frequency, and ohms
easy to operation and carry
Memory storage for up to 8 calibration results
HART mode inserts 250 ohm resistor in mA measure
Measure or source pressure
using any of 29 Fluke 700Pxx Pressure Modules
for calibrating, maintaining, and troubleshooting
dual display
Rechargeable Li-Ion battery
* Type k thermocouple calibrator.
* Type k thermocouple thermometer.
* -199 oC to 1230 oC, -325oF to 2246oF.
* Resolution : 0.1 oC ( <1000 oC ).
(Compatible with pulsed RTD transmitters (pulses > 10ms
ºF or ºC selectable
Measure temperature from TC output
Simulate TC output
Selectable ºF or ºC
source 10 thermocouple types and 7 RTD types
The dual line measure/source display
Measure RTDs, thermocouples, ohms, and volts
* Professional, 1 KHz.
* Die casting aluminum alloy housing case.
* DC 9V batteries x 2 PCs.
* Size : round 50 mm Dia. x 82 mm.
Measure or generate 4 to 20 mA
Measure 0 to 30 V DC
generate pressures from vacuum to 2 MPa
pump can generate vacuum to -80 kPa
Measure pressure with internal sensor up to 345 bar sensor
Measure mA with 0.015% accuracy and 0.001 mA resolution
Measure pressure to 700 bar
using one of 29 Fluke 700Pxx Pressure Modules
30,100and 300 psi ranges
Pressure measurement to 0.05% of full span
Current measurement with 0.02% accuracy
and 0.001 mA resolution
Fluke 719 30G Range: -12 to 36 PSI
Fluke 719 100G Range: -12 to 120 PSI
Resolution: 0.01 PSI
Accuracy: up to 0.025%
:pressure ranges
30psi and 100 psi
mA signals to troubleshoot 4-20 mA loops
Power transmitters using 24 V loop supply
Measures 4 to 20 mA signals
Measure up to 30 V DC
check 24 V loop power supplier
mA sourcing, simulation and measurement
0.02% accuracy and 0.001 mA resolution
0-28:VDC measurement
Current range:0to 24 mA
0.015% accuracy
resolution: 0.001 mA
Measures V DC to 28 V
0.015%mA accuracy of
1µA resolution for mA source
Push button with 25% steps for fast
Measures Vdc to 28 V
Temperature Range:50 to 500°C
Target Size: 57m
Certify IR pyrometers from :–30°C to 500°C
target:Large 57 mm
* Current source : 0 to 24 mA, 2 ranges.
* Current measurement : 0 to 24 mA, 2 ranges.
* Power (12 V) and current measurement of two wire loop : 0 to 24 mA, 2 ranges.
* DC mV source : -199.9mV to +199.9mV.
Voltage AC:400V/750V
Current AC:400/600A
Resistance:4000Ω
AC/DC Voltage up to 600V
AC Current up to 150A
Resistance up to 40Mohm
Capacitance up to 40mF
Temperature:-20°C～1000°C
AC Current:2mA/20mA/60A
Resolution:0.001mA/0.01mA/0.1A
AC/DC Voltage up to 600V
AC Current up to 200A
Resistance up to 20Mohm
Temperature:-20°C～1000°C
AC/DC Voltage up to 600V
AC Current up to 600A
Resistance up to 40Mohm
Capacitance up to 100uF
Frequency up to 100KHz
Temperature:-20°C～1000°C
Controller for heating and boiler control in buildings
controller for both simple
Controllers for heating and boiler control
Compact controllers for heating and boiler control
Equipped with three serial ports and one TCP/IP port
Optigo OP10 is a pre-programmed controller
%Supply voltage:24 V AC ±15
Electric heating controller
Controller with PI-control,230-400V AC
Controller with PI-control,230-400V AC
climate control in public buildings
Load up to 13 A 230 V AC
with built-in sensor and 0...10V output
Ambient temperature:
Ambient temperature:-20-40°C
Ambient temperature 0…40°C
Supply voltage:3-phase, 210...255V / 380...415V AC
Supply voltage:3-phase, 210...255V / 380...415V AC
Supply voltage:3-phase, 210...255V / 380...415V AC
20-segment calibrated bar graph
toxic, Oxygen, combustible gases sensors
A full complement of sensors including:
Accepts inputs from
Accepts inputs from
Display:320 x 240 LCD with backlight
Supports Honeywell gas sensors including
TS35 (‘top hat’) DIN rail mounting
Display: 128 x 64 pixel graphic LCD
* Function is same as the LCR-9184, but without LCD backlight structure, without sorting function
and the spec. accuracy is larger than LCR-9184.
Manual Range
Diode, Transistor, Buzzer
