Sort by
Display
per page
H2S: 0 to 100 ppm
CO: 0 to 300 ppm
SO2: 0 to 50 ppm
O2: 0 to 25%
Measurement Principle:CO
range:0~ 1000ppm
Number: 9389 9004
Measurement Principle:H2S gas
H2S range:0-100ppm
Temperature H2S:-40 to +50°C
Measurement Principle:H2S gas
H2S range:0-100ppm
Temperature H2S:-40 to +50°C
H2S: 0 to 100 ppm
CO: 0 to 300 ppm
SO2: 0 to 50 ppm
O2: 0 to 25%
Oxygen range:0-25% by vol
Carbon Monoxide:0-500 PPM
Hydrogen Sulfide:0-100 PPM
Measurement Principle:H2S gas
range:0~ 100ppm
Number:9389 9006
H2S: 0 to 100 ppm
CO: 0 to 300 ppm
SO2: 0 to 50 ppm
O2: 0 to 25%
Mount sensor up to 100 ft. from transmitter
Mount sensor up to 100 ft. from transmitter
Choice of toxic, oxygen or flammable sensors
Detection Principle SF6: NIC
Range 0 – 2000 ppm SF6
Resolution 500 ppm SF6 / 10 ppm
Detection Principle SF6: NIC
Ultra high sensitivity with a 1 x 10-8 ml/sec
H2S: 0 to 100 ppm
CO: 0 to 300 ppm
SO2: 0 to 50 ppm
O2: 0 to 25%
Sensor:Photoionisation detector
Sensor:Photoionisation detector
Detects VOCs from 0 up to 20,000 ppm
Accuracy:± 5 % display reading ± 1 digit
Detects VOCs from 0 up to 5,000 ppm
Accuracy:± 5 % display reading ± 1 digit
Range 0 to 10 pp, 0 to 100, 0 to 1000 ppm
Measurement Principle:O2 gas
range:0~%30Vol
Number:9389 9003
Minimum Sensitivity PPM Model
Maximum Sensitivity PPB Model
detection of total aromatic compounds (TACs)
Unrivalled sensitivity detects down to ppb levels
Widest range detects gases 0 – 5,000 ppm
CO2, CH4: Infrared
O2, CO, H2S: Electrochemical
VOC: PID
Measurement Principle
Catalytic combustion:flammable gases
range:0~ 100LEL
Number: 9389 9001
Flammable, toxic and Oxygen versions available
Flammable 0-100% LEL
Oxygen 0-25% VOL
Measurement Principle
Electrochemical:oxygen and toxic gases
Catalytic combustion:flammable gases
Infrared:Carbon dioxide
Measurement Principle:H2 gas
range:0~1000ppm
Number: 9389 9002
Mount sensor up to 100 ft. from transmitter
Minimum Detection Limit:5 ppb
Range:0-100 ppm
Minimum Detection Limit:100 ppb
Range>100 ppm
Minimum Detection Limit:0.5 ppb
Range:0-3` ppm
Minimum Detection Limit:1 ppb
Range:0-40 ppm
Minimum Detection Limit:20 ppb
Range>200 ppm
Minimum Detection Limit:100 ppb
Range>4,000 ppm
Minimum Detection Limit:500 ppb
Range>10,000 ppm
Fits a broad variety of existing Honeywell products such as:
System 57, Touchpoint Pro, XNX / Modbus, Midas / Modbus, SPM Flex
Remote visibility on gas detection and worker location
Analysis method: Continuous scan FT-IR analyzer
Gas cell path: 5.0 m path length
Scanning rate: ≤ 15 sec per point
Power requirements: 110 or 230 VAC
Operating temperature: 59° to 95°F
Operating humidity: 20-65% RH
monitoring system with up to 72 points of gas detection
One systems monitors up to 9 gas families
monitors more than 40 gases
H2S Range:0 -100 ppm
CO Range:0 - 300 ppm
O2 range:0 - 25% by vol
SO2 Range:0 -100 ppm
H2S Range:0-100 ppm
CO Range:0-1000 ppm
O2 range:0 -25% by vol
Combustible gases:0-100% LEL
H2S Range:0 -200 ppm
CO Range:0 - 2000 ppm
O2 range:0 -30% by vol
Rapid response to refrigerants including:
R-404a, R-22, R-507, R514A, R-134a
R-407a, R-410a, R-422d, NH3, CO2
HFO1234YF, HFO1234ZE, HFO1233ZD.
Ammonia or Fluorocarbon Monitoring
of Refrigeration System Vent Lines
Detects more than 35 gases error-free
mA loop or Modbus RTU output
Operating temperature: -40°C to +65°C, IP66, Type 4X
Choice of toxic, Oxygen or flammable sensors
tape-based gas detector for low-level toxics
detects the ultrasensitive gases including:
hydrides, mineral acids, oxidizers and amines
کنترل و اندازه گیری خطر گازهای سمی
مجهز به IP66/67
O2, CO, H2S, SO2, CO-H
Cl2, NH3, NO2, PH3, HCN sensors
Available Gases:Methane, Ethane, Propane, Butane
Pentane, Ethylene, Propylene, Butadiene
Range 0 to 5 LEL.m
Material: 316 stainless steel
Response time methane:
T50 < 3 seconds
T90 < 4 seconds
infrared sensor technology
Measurement Range 0-1,000 ppm
Resolution 1 ppm
Accuracy ± 40 ppm @ 500 ppm
five-gas detector from Honeywell
with new 1-Series sensor for enhanced reliability
Honeywell TouchConnect™ Technology
H2S range:0 -200 ppm
CO range:0 -1000 ppm
O2 range:0-30.0%
Combustible gases:0-100% LEL
H2S range:0 -100 ppm
CO range:0 - 500 ppm
O2 range:0-30.0%
Combustible gases:0-100% LEL
Monitors H2S, CO, O2, SO2, PH3, CI2
NH3, NO2, HCN, CIO2, O3 and combustibles
four-gas detector
Enhanced resistance to sensitive gases
methanol and ethanol,CO and H2S sensors
Technology:Bluetooth® low energy
Wireless range Up to 10 m
See real-time gas readings on each lone worker’s detector
Cloud-based monitoring platform
Cellular, WiFi and optionally satellite networks
Up to 64 wireless detectors
RF Frequency: 2.4GHz ISM Band
IEEE 802.15.4 standard compliant
Operating Range: 300 meters / 985 feet
Sensor:Photoionisation detector
Sensor:Photoionisation detector
3alarm relays and audible alarms
detect refrigerants,toxic and explosive gases
Analog and Serial Outputs
Sampling Distance:90m
LonWorks® Interface Available
gas detection:CO, NO2, O2, H2, H2S, CH4, C3H3
Analog 4-20 mA or Digital outputs
detects toxic and combustible gase
Infrared sensing technology
Field of Coverage: ± 90° solid angle from on axis
Area of Coverage: typically 20m
Detector:High Voltage Ionisation
Sensitivity:1 x 10E-6 mbar 1,s for SF6
Micro thermal conductivity detector-MTCD
Sensitivity He 1 x 10-5
Accuracy ± 5% display reading ± one digit
